Female Threaded Adaptor
Specification Female Threaded Adaptor Standard INSO 13361-3 :National ISO 1452-3 :International For order placement and the latest price inquiries, please contact our specialists. (035-3540) Size Nominal Pressure (PN) Nominal Inner Diameter (Female) Female Thickness Minimum Female Length “1*32 16 32.1- 32.3 3.6 22 “1*20 20 20.1- 20.3 2.4 16
Elbow 45°
Specification Elbow 45° Standard INSO 13361-3 :National ISO 1452-3 :International For order placement and the latest price inquiries, please contact our specialists. (035-3540) Size Nominal Pressure (PN) Nominal Inner Diameter (Female ) Female Thickness Minimum Female Length 50 16 50.1- 50.3 4.6 31 63 16 63.1- 63.3 5.8 37.5 75 16 75.1- 75.3 6.8 43.5 […]
Mufe
Specification Mufe Standard INSO 9119-1 :National BS EN 1329-1 :International Mufe is an interface in the form of an O-ring head and an adhesive head, and it is usually used at appropriate distances in the building to increase the flexibility of the network against building settlement, earthquakes, expansion and contraction of the network, and passive […]
P-Trap
A P-Trap is a type of pipe fitting designed to Prevent the backflow of wastewater Block unpleasant odors Stop pests and insects from entering the building through the drainage system The P-Trap must be designed in a way that prevents the accumulation of debris or sediment inside. Its internal surface should be smooth and free […]
Straight Coupler
Specification Without brake Standard INSO 9119-1 :National BS EN 1329-1 :International For order placement and the latest price inquiries, please contact our specialists. (035-3540) Size Application Area Wall Thickness (mm) Application Area Wall Thickness (mm) Ring Stiffness (SN) Color 63 B 3 * * * gray 75 B 3 * * * gray 90 […]
Straight Coupler (with Brake)
Specification Standard INSO 9119-1 :National BS EN 1329-1 :International Coupling is a seemingly simple but very practical connection whose task is to connect the male part of two tapered pipes in the pipeline. “Coupling ” is a type of “connecting ring” between two pipes or a cylindrical connection with two female ends that easily connects […]
Male Cap
A Male Cap is a connection that is used to temporarily or permanently block the sewer or ventilation system. Specification Standard INSO 9119-1 :National BS EN 1329-1 :International For order placement and the latest price inquiries, please contact our specialists. (035-3540) Size Application Area Wall Thickness (mm) Application Area Wall Thickness (mm) Ring Stiffness […]
Female Cap
Specification Standard INSO 9119-1 :National BS EN 1329-1 :International For order placement and the latest price inquiries, please contact our specialists. (035-3540) Size Application Area Wall Thickness (mm) Application Area Wall Thickness (mm) Ring Stiffness (SN) Color 63 B 3 * * * gray 75 B 4 * * * gray 90 B 3 BD […]
Clean out tee (Three pieces)
Specification Three-Piece 90° Cleanout Tee Standard INSO 9119-1 :National BS EN 1329-1 :International To allow inspection and clearing of potential blockages in the wastewater pipes, cleanout fittings must be installed at the following points: At the highest point of each horizontal branch Where the horizontal pipe changes direction by more than 45 degrees At the […]
Clean out
Specification Standard INSO 9119-1 :National BS EN 1329-1 :International For order placement and the latest price inquiries, please contact our specialists. (035-3540) Size Application Area Wall Thickness (mm) Application Area Wall Thickness (mm) Ring Stiffness (SN) Color 63 B 3 * * * gray 90 B 3 BD 3 4 gray 110 B 3/2 BD […]