Specification
Three-Piece 90° Cleanout Tee
| Standard |
|---|
| INSO 9119-1 :National |
| BS EN 1329-1 :International |
To allow inspection and clearing of potential blockages in the wastewater pipes, cleanout fittings must be installed at the following points:
- At the highest point of each horizontal branch
- Where the horizontal pipe changes direction by more than 45 degrees
- At the lowest point, just before the bottom bend of the vertical soil pipe
- On the main horizontal pipe, immediately after it exits the building
| Size | Application Area | Wall Thickness (mm) | Application Area | Wall Thickness (mm) | Ring Stiffness (SN) | Color |
|---|---|---|---|---|---|---|
| 110 | B | 3/2 | BD | 3/2 | 4 | gray |